Ga 81915pmd Motherboard Manual

Posted:admin

You may only add up to 5 items for comparison at one time. Motherboard Socket 775 GA-8I945P-G.

• GA-8I915P Duo Intel Pentium 4 LGA775 Processor Motherboard ® ® User's Manual Rev. 2001 12ME-8I915PD2-2001. • Gigabyte's prior written permission. Specifications and features are subject to change without prior notice.

Product Manual Classification In order to assist in the use of this product, Gigabyte has categorized the user manual in the following: For quick installation, please refer to the 'Hardware Installation Guide' included with the product. • Table of Contents GA-8I915P Duo Motherboard Layout.

6 Block Diagram. 7 Chapter 1 Hardware Installation. 9 Considerations Prior to Installation. 9 Feature Summary.

10 Installation of the CPU and Heatsink. 12 1-3-1 Installation of the CPU. 12 1-3-2 Installation of the Heatsink. • Chapter 3 Install Drivers. 49 Install Chipset Drivers.

49 Software Applications. 50 Driver CD Information. 50 Hardware Information. 51 Contact Us. 51 Chapter 4 Appendix.

53 Unique Software Utilities. 53 4-1-1 EasyTune 5 Introduction. Civil war in the east. 54 4-1-2 Xpress Recovery Introduction.

• GA-8I915P Duo Motherboard Layout ATX_12V KB_MS R_USB AUDIO1 AUDIO2 IT8712 F_AUDIO Marvell 8001 CODEC CD_IN BIOS SPDIF_IO CPU_FAN LGA775 Intel 915P PCIE_16 PCIE_1 PCIE_2 PCI1 PCI2 PCI3 F_USB2 F_USB1 - 6 - IDE1 SYS_FAN ICH6 SATA3 SATA2 SATA1 SATA0 VT6410. • Block Diagram PCI-ECLK (100MHz) PCI Express x16 2 PCI Express x1 PCI-ECLK (100MHz) PCI Express Bus PCI Bus Marvell VT6410 8001 IDE RAID RJ45 IDE2/IDE3 3 PCI PCICLK (33MHz) (Note) To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and overclock in BIOS. Damage as a result of violating the conditions recommended in the user manual. Damage due to improper installation. Damage due to use of uncertified components.

Damage due to use exceeding the permitted parameters. Product determined to be an unofficial Gigabyte product.

- 9 - Hardware Installation. • Onboard Marvell 8001 chip (10/100/1000 Mbit) 1 RJ 45 port (Note) To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and overclock in BIOS. GA-8I915P Duo Motherboard Pentium 4 LGA775 CPU ®. • Onboard Audio ALC850 CODEC (UAJ) Supports Jack Sensing function Supports 2 / 4 / 6 / 8 channel audio Supports Line In; Line Out (Front Speaker Out); MIC; Surround Speaker Out (Rear Speaker Out); Center/Subwoofer Speaker Out; Side Speaker Out connection Supports SPDIF In/Out connection CD In.

• Avoid twisting or bending motions that might cause damage to the CPU during installation.) GA-8I915P Duo Motherboard Fig. 2 Remove the plastic covering on the CPU socket. • 1-3-2 Installation of the Heatsink Fig.1 Please apply an even layer of heatsink paste on the surface of the installed CPU. 3 Place the heatsink atop the CPU and make sure the push pins aim to the pin hole on the motherboard.Pressing down the push pins diagonally. • The motherboard supports DDR/DDRII memory modules, whereby BIOS will automatically detect memory capacity and specifications. Memory modules are designed so that they can be inserted only in one direction. The memory capacity used can differ with each slot.

GA-8I915P Duo Motherboard Notch DDR II Fig.1. • GA-8I915P Duo supports the Dual Channel Technology. After operating the Dual Channel Technology, the bandwidth of Memory Bus will add double. GA-8I915P Duo includes 4 DIMM sockets, and each Channel has two DIMM sockets as following: Channel A: DDR 1. • Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.

Install related driver from the operating system. Installing a PCI Express x 16 expansion card: GA-8I915P Duo Motherboard Please align the VGA card to the onboard PCI Express x 16 slot and press firmly down on the slot. • I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple).

Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices. COM A/COM B (Serial Port) Connects to serial-based mouse or data processing devices. • Connectors Introduction ATX_12V ATX (Power Connector) CPU_FAN SYS_FAN IDE1/IDE2/IDE3 SATA0 / SATA1 / SATA2 / SATA3 F_PANEL PWR_LED GA-8I915P Duo Motherboard F_AUDIO CD_IN SPDIF_IO F_USB1 / F_USB2 CLR_CMOS - 18.

• 1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed.

Popular Posts

You may only add up to 5 items for comparison at one time. Motherboard Socket 775 GA-8I945P-G.
$\'Ga$
• GA-8I915P Duo Intel Pentium 4 LGA775 Processor Motherboard ® ® User\'s Manual Rev. 2001 12ME-8I915PD2-2001. • Gigabyte\'s prior written permission. Specifications and features are subject to change without prior notice.
Product Manual Classification In order to assist in the use of this product, Gigabyte has categorized the user manual in the following: For quick installation, please refer to the \'Hardware Installation Guide\' included with the product. • Table of Contents GA-8I915P Duo Motherboard Layout.
6 Block Diagram. 7 Chapter 1 Hardware Installation. 9 Considerations Prior to Installation. 9 Feature Summary.
10 Installation of the CPU and Heatsink. 12 1-3-1 Installation of the CPU. 12 1-3-2 Installation of the Heatsink. • Chapter 3 Install Drivers. 49 Install Chipset Drivers.
49 Software Applications. 50 Driver CD Information. 50 Hardware Information. 51 Contact Us. 51 Chapter 4 Appendix.
53 Unique Software Utilities. 53 4-1-1 EasyTune 5 Introduction. Civil war in the east. 54 4-1-2 Xpress Recovery Introduction.
$\'Manual\'$
• GA-8I915P Duo Motherboard Layout ATX_12V KB_MS R_USB AUDIO1 AUDIO2 IT8712 F_AUDIO Marvell 8001 CODEC CD_IN BIOS SPDIF_IO CPU_FAN LGA775 Intel 915P PCIE_16 PCIE_1 PCIE_2 PCI1 PCI2 PCI3 F_USB2 F_USB1 - 6 - IDE1 SYS_FAN ICH6 SATA3 SATA2 SATA1 SATA0 VT6410. • Block Diagram PCI-ECLK (100MHz) PCI Express x16 2 PCI Express x1 PCI-ECLK (100MHz) PCI Express Bus PCI Bus Marvell VT6410 8001 IDE RAID RJ45 IDE2/IDE3 3 PCI PCICLK (33MHz) (Note) To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and overclock in BIOS. Damage as a result of violating the conditions recommended in the user manual. Damage due to improper installation. Damage due to use of uncertified components.
Damage due to use exceeding the permitted parameters. Product determined to be an unofficial Gigabyte product.
- 9 - Hardware Installation. • Onboard Marvell 8001 chip (10/100/1000 Mbit) 1 RJ 45 port (Note) To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and overclock in BIOS. GA-8I915P Duo Motherboard Pentium 4 LGA775 CPU ®. • Onboard Audio ALC850 CODEC (UAJ) Supports Jack Sensing function Supports 2 / 4 / 6 / 8 channel audio Supports Line In; Line Out (Front Speaker Out); MIC; Surround Speaker Out (Rear Speaker Out); Center/Subwoofer Speaker Out; Side Speaker Out connection Supports SPDIF In/Out connection CD In.
• Avoid twisting or bending motions that might cause damage to the CPU during installation.) GA-8I915P Duo Motherboard Fig. 2 Remove the plastic covering on the CPU socket. • 1-3-2 Installation of the Heatsink Fig.1 Please apply an even layer of heatsink paste on the surface of the installed CPU. 3 Place the heatsink atop the CPU and make sure the push pins aim to the pin hole on the motherboard.Pressing down the push pins diagonally. • The motherboard supports DDR/DDRII memory modules, whereby BIOS will automatically detect memory capacity and specifications. Memory modules are designed so that they can be inserted only in one direction. The memory capacity used can differ with each slot.
GA-8I915P Duo Motherboard Notch DDR II Fig.1. • GA-8I915P Duo supports the Dual Channel Technology. After operating the Dual Channel Technology, the bandwidth of Memory Bus will add double. GA-8I915P Duo includes 4 DIMM sockets, and each Channel has two DIMM sockets as following: Channel A: DDR 1. • Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
Install related driver from the operating system. Installing a PCI Express x 16 expansion card: GA-8I915P Duo Motherboard Please align the VGA card to the onboard PCI Express x 16 slot and press firmly down on the slot. • I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple).
Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices. COM A/COM B (Serial Port) Connects to serial-based mouse or data processing devices. • Connectors Introduction ATX_12V ATX (Power Connector) CPU_FAN SYS_FAN IDE1/IDE2/IDE3 SATA0 / SATA1 / SATA2 / SATA3 F_PANEL PWR_LED GA-8I915P Duo Motherboard F_AUDIO CD_IN SPDIF_IO F_USB1 / F_USB2 CLR_CMOS - 18.
• 1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed.
...'>Ga 81915pmd Motherboard Manual(19.02.2019)
You may only add up to 5 items for comparison at one time. Motherboard Socket 775 GA-8I945P-G.
$\'Ga$
• GA-8I915P Duo Intel Pentium 4 LGA775 Processor Motherboard ® ® User\'s Manual Rev. 2001 12ME-8I915PD2-2001. • Gigabyte\'s prior written permission. Specifications and features are subject to change without prior notice.
Product Manual Classification In order to assist in the use of this product, Gigabyte has categorized the user manual in the following: For quick installation, please refer to the \'Hardware Installation Guide\' included with the product. • Table of Contents GA-8I915P Duo Motherboard Layout.
6 Block Diagram. 7 Chapter 1 Hardware Installation. 9 Considerations Prior to Installation. 9 Feature Summary.
10 Installation of the CPU and Heatsink. 12 1-3-1 Installation of the CPU. 12 1-3-2 Installation of the Heatsink. • Chapter 3 Install Drivers. 49 Install Chipset Drivers.
49 Software Applications. 50 Driver CD Information. 50 Hardware Information. 51 Contact Us. 51 Chapter 4 Appendix.
53 Unique Software Utilities. 53 4-1-1 EasyTune 5 Introduction. Civil war in the east. 54 4-1-2 Xpress Recovery Introduction.
$\'Manual\'$
• GA-8I915P Duo Motherboard Layout ATX_12V KB_MS R_USB AUDIO1 AUDIO2 IT8712 F_AUDIO Marvell 8001 CODEC CD_IN BIOS SPDIF_IO CPU_FAN LGA775 Intel 915P PCIE_16 PCIE_1 PCIE_2 PCI1 PCI2 PCI3 F_USB2 F_USB1 - 6 - IDE1 SYS_FAN ICH6 SATA3 SATA2 SATA1 SATA0 VT6410. • Block Diagram PCI-ECLK (100MHz) PCI Express x16 2 PCI Express x1 PCI-ECLK (100MHz) PCI Express Bus PCI Bus Marvell VT6410 8001 IDE RAID RJ45 IDE2/IDE3 3 PCI PCICLK (33MHz) (Note) To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and overclock in BIOS. Damage as a result of violating the conditions recommended in the user manual. Damage due to improper installation. Damage due to use of uncertified components.
Damage due to use exceeding the permitted parameters. Product determined to be an unofficial Gigabyte product.
- 9 - Hardware Installation. • Onboard Marvell 8001 chip (10/100/1000 Mbit) 1 RJ 45 port (Note) To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and overclock in BIOS. GA-8I915P Duo Motherboard Pentium 4 LGA775 CPU ®. • Onboard Audio ALC850 CODEC (UAJ) Supports Jack Sensing function Supports 2 / 4 / 6 / 8 channel audio Supports Line In; Line Out (Front Speaker Out); MIC; Surround Speaker Out (Rear Speaker Out); Center/Subwoofer Speaker Out; Side Speaker Out connection Supports SPDIF In/Out connection CD In.
• Avoid twisting or bending motions that might cause damage to the CPU during installation.) GA-8I915P Duo Motherboard Fig. 2 Remove the plastic covering on the CPU socket. • 1-3-2 Installation of the Heatsink Fig.1 Please apply an even layer of heatsink paste on the surface of the installed CPU. 3 Place the heatsink atop the CPU and make sure the push pins aim to the pin hole on the motherboard.Pressing down the push pins diagonally. • The motherboard supports DDR/DDRII memory modules, whereby BIOS will automatically detect memory capacity and specifications. Memory modules are designed so that they can be inserted only in one direction. The memory capacity used can differ with each slot.
GA-8I915P Duo Motherboard Notch DDR II Fig.1. • GA-8I915P Duo supports the Dual Channel Technology. After operating the Dual Channel Technology, the bandwidth of Memory Bus will add double. GA-8I915P Duo includes 4 DIMM sockets, and each Channel has two DIMM sockets as following: Channel A: DDR 1. • Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
Install related driver from the operating system. Installing a PCI Express x 16 expansion card: GA-8I915P Duo Motherboard Please align the VGA card to the onboard PCI Express x 16 slot and press firmly down on the slot. • I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple).
Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices. COM A/COM B (Serial Port) Connects to serial-based mouse or data processing devices. • Connectors Introduction ATX_12V ATX (Power Connector) CPU_FAN SYS_FAN IDE1/IDE2/IDE3 SATA0 / SATA1 / SATA2 / SATA3 F_PANEL PWR_LED GA-8I915P Duo Motherboard F_AUDIO CD_IN SPDIF_IO F_USB1 / F_USB2 CLR_CMOS - 18.
• 1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed.
...'>Ga 81915pmd Motherboard Manual(19.02.2019)